Type-Rating - A350 A350 Type Rating

Auxiliary Power Unit

Preview sample question from this topic

51 Questions in this topic

Get Full Access

Access all 51 questions

Starting at
USD 19,99
Subscribe Now

No auto-renewal • One-time payment only

Question 24005
Click on an answer to check if it's correct
Which conditions must be met for the APU start sequence to begin?
A
The rotor speed must reach 10% and the master switch must be on.
B
The Inlet Guide Vanes must be open and the EGT must be below 100 degrees.
C
The air-intake flap must be fully open and the start push button activated.
D
The fuel pump must be active and the bleed valve must be closed.